[1.1.2 (1.1.2 OTB week 50) ][IMEI & ICCID Unknown and Repair Nedeed]

[tckmarco]

I have a problem ! I read all posts in the forum and no found soluction for my case...

look my case...

Ihave one iphone fw 1.1.2 OTB week 50 !
I try to harsware unlock on my iphone ... And when i erase the baseband and write it again... Have a problem... And i restart the iphone .. I try to restone the iphone for the fw 1.1.1 .. I thought its complete this step the iphone back to the normal mode... But after the iphone show me the error Reapair Nedeed and the *#307# + Call not employee... and i try to restore my iphone for the fw's 1.1.1, 1.1.2, 1.1.3... I try to restore for fw 1.0.2 but my iphone is 50 week and the iphones up for the 49 week no accept the fw 1.0.2... The iTunes sayng... ¨Waiting the phone¨ all the time... I try too downgrade from iBrickr... and not employee too....
All the restores show me the error 1011... ever... I try to normal mode... and in DFU mode (Home + Power) ele sempre da o erro 1011...
I try to restore in all version of iTunes.. 7.4~7.6...
All the people sayng in the forum after retore the iphone for fw 1.1.3.. its back... But my iphone no... Its presents the error 1011 ever... and dont have the imei and ICCI...

Anybody helpme ???
Please... Thanks a lot !


PS: Sorry for bad english.

[alino74]

I have a problem ! I read all posts in the forum and no found soluction for my case...

look my case...

Ihave one iphone fw 1.1.2 OTB week 50 !
I try to harsware unlock on my iphone ... And when i erase the baseband and write it again... Have a problem... And i restart the iphone .. I try to restone the iphone for the fw 1.1.1 .. I thought its complete this step the iphone back to the normal mode... But after the iphone show me the error Reapair Nedeed and the *#307# + Call not employee... and i try to restore my iphone for the fw's 1.1.1, 1.1.2, 1.1.3... I try to restore for fw 1.0.2 but my iphone is 50 week and the iphones up for the 49 week no accept the fw 1.0.2... The iTunes sayng... ¨Waiting the phone¨ all the time... I try too downgrade from iBrickr... and not employee too....
All the restores show me the error 1011... ever... I try to normal mode... and in DFU mode (Home + Power) ele sempre da o erro 1011...
I try to restore in all version of iTunes.. 7.4~7.6...
All the people sayng in the forum after retore the iphone for fw 1.1.3.. its back... But my iphone no... Its presents the error 1011 ever... and dont have the imei and ICCI...

Anybody helpme ???
Please... Thanks a lot !


PS: Sorry for bad english.

dal nome credo che sei italiano.

I am in your same situation, i think we are fu...ed

[tckmarco]

I have a problem ! I read all posts in the forum and no found soluction for my case...

look my case...

Ihave one iphone fw 1.1.2 OTB week 50 !
I try to harsware unlock on my iphone ... And when i erase the baseband and write it again... Have a problem... And i restart the iphone .. I try to restone the iphone for the fw 1.1.1 .. I thought its complete this step the iphone back to the normal mode... But after the iphone show me the error Reapair Nedeed and the *#307# + Call not employee... and i try to restore my iphone for the fw's 1.1.1, 1.1.2, 1.1.3... I try to restore for fw 1.0.2 but my iphone is 50 week and the iphones up for the 49 week no accept the fw 1.0.2... The iTunes sayng... ¨Waiting the phone¨ all the time... I try too downgrade from iBrickr... and not employee too....
All the restores show me the error 1011... ever... I try to normal mode... and in DFU mode (Home + Power) ele sempre da o erro 1011...
I try to restore in all version of iTunes.. 7.4~7.6...
All the people sayng in the forum after retore the iphone for fw 1.1.3.. its back... But my iphone no... Its presents the error 1011 ever... and dont have the imei and ICCI...

Anybody helpme ???
Please... Thanks a lot !


PS: Sorry for bad english.


Anybody Help ME ???

[Gstar]

no one cares about us since the SW unlock is out. perhaps our phones are really irreparable. WE ARE LOST AND OUR IPHONES ARE GARBAGE !!!!

4 weeks ago geohot told us that there is no SW unlock in the near future. we have bricked our phones and now there is the easiest unlock ever available.

i am FRUSTRATED!!! 400 bucks blown away :D

[xantor]

no one cares about us since the SW unlock is out. perhaps our phones are really irreparable. WE ARE LOST AND OUR IPHONES ARE GARBAGE !!!!

4 weeks ago geohot told us that there is no SW unlock in the near future. we have bricked our phones and now there is the easiest unlock ever available.

i am FRUSTRATED!!! 400 bucks blown away :D

I found what the problem was with my bricked phone, I suspect it is tv same problem that you all have. The problem with mine was that the line used for the testpoint was broken and did not allow the iPhone to erase or reflash the baseband. A friend of mine using a special camera to zoom in was able to reconstruct track 17 after that I restored my iPhone to 1.1.3 and then took it back to 1.1.1, jailbreaked it an unlocked using gunlock. Hope this helps, I know how you guys feel, I really was very frustrated until I found the problem. Please write if it works for you.

[Gstar]

do you mean with a conductive pen? if so i'll check the trace with a microscope and then repair it.

thx gstar

[alino74]

i will check to..

[Inutero]

exactly the same problem, the only diference its that mi iphone is from week 46 and i restored to 1.0.2 but no luck with flashing the baseband (bbupdater -f *.fls -e *.eep) and when i restore always error 1011 so think i have an expensive paper holder :(

[Gstar]

hi,

yesterday i've talked to apple care center. it was a funny telefon call... he asked me how i activated the phone w/o att or t-mobile contract... :) he told me that it is my iphone and that i can do what i want but he tried to help me.

the error 1011 is a connection error. the result of a restoring or update procedure is saved in a log file on your computer. path for XP: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Updater Logs
ok here is an extract of mine when i tried to make a full restore to 1.1.3 to fix my baseband:

Restoring ....10....20....30....40....50....60....70....80.. ..90....100
Copied 255595008 bytes in 81.99 seconds, 3044.23 KiB/s
Verifying ....10....20....30....40....50....60....70....80.. ..90....100
Verified SHA-1 checksum 255595008 bytes in 55.80 seconds, 4473.21 KiB/s
entering mount_filesystems
executing /sbin/fsck_hfs
** /dev/rdisk0s1
** Checking HFS Plus volume.
** Detected a case-sensitive catalog.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking Catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
** The volume LittleBear4A93.UserBundle appears to be OK.
executing /sbin/mount_hfs
executing /sbin/fsck_hfs
** /dev/rdisk0s2
** Checking HFS Plus volume.
** Detected a case-sensitive catalog.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking Catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
entering fixup_var
remove_path /mnt1/private/var
executing /bin/rm
creating directory (owner=0 mode=755) /mnt1/private/var
entering unmount_filesystems
entering clear_persistent_boot_args
executing /usr/sbin/nvram
entering update_NOR
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing LLB data
entering update_baseband
perform_baseband_update: update_baseband_bootloader=1 force_baseband_update=0
executing /usr/local/bin/bbupdater
Resetting target...
pinging the baseband...
baseband unresponsive to pinging
no appropriate bootloader found
Done
executing /usr/local/bin/bbupdater
Resetting target...
pinging the baseband...
baseband unresponsive to pinging
will update with /usr/local/standalone/firmware/ICE04.03.13_G.fls
and /usr/local/standalone/firmware/ICE04.03.13_G.eep
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 1
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 2
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 3
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 4
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 5
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 6
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 7
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 8
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 9
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 10
Error: Baseband bootloader is too old; update to 1.8 or later and try again
Done
matching ICE04.03.13_G.fls...
currVers 0x47, fileVers 0x4030d47
will update with this version

==== end of device restore output ====
[libusbrestore: 0x270, 13:20:19.296] => <Restore Device 022C2D58>: Restore failed (result = 1011)

so i think that the trace is broken or the baseband chip is totally damaged.
any suggestions?

gstar

[p01s0n]

hi,

yesterday i've talked to apple care center. it was a funny telefon call... he asked me how i activated the phone w/o att or t-mobile contract... :) he told me that it is my iphone and that i can do what i want but he tried to help me.

the error 1011 is a connection error. the result of a restoring or update procedure is saved in a log file on your computer. path for XP: C:\Documents and Settings\[username]\Application Data\Apple Computer\iTunes\iPhone Updater Logs
ok here is an extract of mine when i tried to make a full restore to 1.1.3 to fix my baseband:

Restoring ....10....20....30....40....50....60....70....80.. ..90....100
Copied 255595008 bytes in 81.99 seconds, 3044.23 KiB/s
Verifying ....10....20....30....40....50....60....70....80.. ..90....100
Verified SHA-1 checksum 255595008 bytes in 55.80 seconds, 4473.21 KiB/s
entering mount_filesystems
executing /sbin/fsck_hfs
** /dev/rdisk0s1
** Checking HFS Plus volume.
** Detected a case-sensitive catalog.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking Catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
** The volume LittleBear4A93.UserBundle appears to be OK.
executing /sbin/mount_hfs
executing /sbin/fsck_hfs
** /dev/rdisk0s2
** Checking HFS Plus volume.
** Detected a case-sensitive catalog.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking Catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
entering fixup_var
remove_path /mnt1/private/var
executing /bin/rm
creating directory (owner=0 mode=755) /mnt1/private/var
entering unmount_filesystems
entering clear_persistent_boot_args
executing /usr/sbin/nvram
entering update_NOR
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing LLB data
entering update_baseband
perform_baseband_update: update_baseband_bootloader=1 force_baseband_update=0
executing /usr/local/bin/bbupdater
Resetting target...
pinging the baseband...
baseband unresponsive to pinging
no appropriate bootloader found
Done
executing /usr/local/bin/bbupdater
Resetting target...
pinging the baseband...
baseband unresponsive to pinging
will update with /usr/local/standalone/firmware/ICE04.03.13_G.fls
and /usr/local/standalone/firmware/ICE04.03.13_G.eep
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 1
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 2
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 3
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 4
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 5
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 6
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 7
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 8
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 9
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 10
Error: Baseband bootloader is too old; update to 1.8 or later and try again
Done
matching ICE04.03.13_G.fls...
currVers 0x47, fileVers 0x4030d47
will update with this version

==== end of device restore output ====
[libusbrestore: 0x270, 13:20:19.296] => <Restore Device 022C2D58>: Restore failed (result = 1011)

so i think that the trace is broken or the baseband chip is totally damaged.
any suggestions?

gstar




same output :(

==== device restore output ====
entering wait_for_storage_device
entering create_filesystem_partitions
executing /sbin/newfs_hfs
Initialized /dev/rdisk0s1 as a 300 MB HFS Plus volume
executing /sbin/newfs_hfs
Initialized /dev/rdisk0s2 as a 7443 MB HFS Plus volume
entering restore_images
executing /usr/sbin/asr
Waiting for connection attempt from server
Validating target...done
Validating source...done
Warning: the target volume may not be bootable

Erasing target device /dev/disk0s1...done
Retrieving scan information...done
Validating sizes...done
Restoring ....10....20....30....40....50....60....70....80.. ..90....100
Copied 255595008 bytes in 82.54 seconds, 3023.98 KiB/s
Verifying ....10....20....30....40....50....60....70....80.. ..90....100
Verified SHA-1 checksum 255595008 bytes in 52.44 seconds, 4760.03 KiB/s
entering mount_filesystems
executing /sbin/fsck_hfs
** /dev/rdisk0s1
** Checking HFS Plus volume.
** Detected a case-sensitive catalog.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking Catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
** The volume LittleBear4A93.UserBundle appears to be OK.
executing /sbin/mount_hfs
executing /sbin/fsck_hfs
** /dev/rdisk0s2
** Checking HFS Plus volume.
** Detected a case-sensitive catalog.
** Checking Extents Overflow file.
** Checking Catalog file.
** Checking Catalog hierarchy.
** Checking volume bitmap.
** Checking volume information.
** The volume Data appears to be OK.
executing /sbin/mount_hfs
entering fixup_var
remove_path /mnt1/private/var
executing /bin/rm
creating directory (owner=0 mode=755) /mnt1/private/var
entering unmount_filesystems
entering clear_persistent_boot_args
executing /usr/sbin/nvram
entering update_NOR
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing NOR data
flashing LLB data
entering update_baseband
perform_baseband_update: update_baseband_bootloader=1 force_baseband_update=0
executing /usr/local/bin/bbupdater
Resetting target...
pinging the baseband...
baseband unresponsive to pinging
no appropriate bootloader found
Done
executing /usr/local/bin/bbupdater
Resetting target...
pinging the baseband...
baseband unresponsive to pinging
will update with /usr/local/standalone/firmware/ICE04.03.13_G.fls
and /usr/local/standalone/firmware/ICE04.03.13_G.eep
Preparing to flash using /dev/tty.baseband at 750000 baud
Please reset target
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 1
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 2
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 3
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 4
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 5
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 6
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 7
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 8
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 9
Resetting target...
ProcessOutlineUpdated: Process time was 10.0 sec.
Retry attempt 10
Error: Baseband bootloader is too old; update to 1.8 or later and try again
Done
matching ICE04.03.13_G.fls...
currVers 0x47, fileVers 0x4030d47
will update with this version

==== end of device restore output ====
[libusbrestore: 0x98, 20:19:18.814] => <Restore Device 02202A30>: Restore failed (result = 1011)

[xantor]

It looks like you have the sema problem i had, as i understand line A17 is the one that allows the chip to be flashed or erased, that is why your log stops when trying to write the nor. Mine was badly broken so my friend had to solder a very thin wire to rebuild the line, find somebody that can do that and i'm sure you will bring your bricks back to life. Good luck

[Gstar]

hello,

ok the next step is now to find someone who can solder this trace for me cause i don't touch the commboard anymore :rolleyes:

this HW unlock seems to be a never ending story :eek:

there is a pretty little one-click-solution app for windows out now to unlock the 1.1.2/1.1.3 OTB (www.sendowski.de). did 2 iphones with this for friends. each took 3 minutes to unlock. and mine ???? GGGGRRRRRRRR I AM FRUSTRATED :mad:

ok always looking forwards....we can make it !!!

please post your success (or failure but i dont hope so).

hopeful

gstar

[sabotaged]

As a last resort you can buy a new comm board. I bought one and it fixed my iPhone that had the same symptoms. You need to be able to solder the three battery wires on and off though, or get someone to.

[Gstar]

As a last resort you can buy a new comm board. I bought one and it fixed my iPhone that had the same symptoms. You need to be able to solder the three battery wires on and off though, or get someone to.

hi,

yes i know. but i think i am not good in soldering :rolleyes:

but now i was able to check the trace with my webcam that is able to zoom in. there is a photo i another thread. i try to fix it with conductiv silver.

gstar

[CKone]

where to get a new comm board?
i thinks its the only way to get my phone back to working

[Gstar]

http://www.ifixit.com

[CKone]

not in stock!

[Gstar]

here is another shop (http://www.iphone-repairs.co.uk/spares.html) but its in england.

gstar

[ibroken]

So are all my frustrations because the trace is broken?

I used a cheap microscope to check mine but It doesn't look like its broken.

I believe that radio shack sells a trace repair tool.

Anybody have anyluck fixing there iphones with this issue by repairing the trace?

[Gstar]

So are all my frustrations because the trace is broken?

I used a cheap microscope to check mine but It doesn't look like its broken.

I believe that radio shack sells a trace repair tool.

Anybody have anyluck fixing there iphones with this issue by repairing the trace?

hi ibroken,

wow on radioshack.com they sell a circuit writer link (http://www.radioshack.com/product/index.jsp?productId=2104395&cp=&sr=1&origkw=trace&kw=trace&parentPage=search).

if the top of the writer is really fine then it is the best repair tool and its really cheap. in germany you pay around 40 $ for a writer like that. that is why i have ordered the silver lacquer.

anyway i dont know your detailed symptons. mine are "spamming AT", error 1011when restoring to 1.1.3 (which is a connection error) and i can see it in the restore log file that the baseband cannot be restored. these are all symptoms of a broken trace. and you have seen the picture of my trace. it seems to be really really broken. so this is the last chance before ordering a new commboard....

gstar

[ibroken]

hi ibroken,

wow on radioshack.com they sell a circuit writer link (http://www.radioshack.com/product/index.jsp?productId=2104395&cp=&sr=1&origkw=trace&kw=trace&parentPage=search).

if the top of the writer is really fine then it is the best repair tool and its really cheap. in germany you pay around 40 $ for a writer like that. that is why i have ordered the silver lacquer.

anyway i dont know your detailed symptons. mine are "spamming AT", error 1011when restoring to 1.1.3 (which is a connection error) and i can see it in the restore log file that the baseband cannot be restored. these are all symptoms of a broken trace. and you have seen the picture of my trace. it seems to be really really broken. so this is the last chance before ordering a new commboard....

gstar

So you haven't tried to repair it yet? Those are the same symptoms that I am getting.

Also, when i go to field test mode, the only thing selectable is versions and in there it says firmware is blank. (*3001#12345#* send)

[p01s0n]

hi guys, i'm trying right now to repair the A17 trace with a copper based conductive paint...
For now no results...

[Gstar]

hi p01s0n,

somewhere i've read that the paint have to dry min. 1 hour before its conductive...

GOOD LUCK TO YOU !!!!

[Ozgoth]

hey you tryed the Ziphone method? i have the same problem, but someone here in hackintoshh told me that this method will work, ill check it and in 15 minutes ill reply if something happens
see ya:)

[p01s0n]

hey you tryed the Ziphone method? i have the same problem, but someone here in hackintoshh told me that this method will work, ill check it and in 15 minutes ill reply if something happens
see ya:)

If you have a broken trace I think there aren't software methods which can solve the problem.

[ibroken]

I repaired my trance and it didn't work.

I think it only works if you haven't restored to 1.1.3 before.

I restored to 1.1.3 at somepoint, before I attempted the HW hack. SO I hope teh 1.1.4 will fix it.

[p01s0n]

I repaired my trance and it didn't work.

I think it only works if you haven't restored to 1.1.3 before.

I restored to 1.1.3 at somepoint, before I attempted the HW hack. SO I hope teh 1.1.4 will fix it.

I think same situation here...

[ibroken]

I think one way to repair our hpones is to mod the gehot's bootloader downgrader. the thing that stops it for haults the process ont a hpone in our situation is that the program "checks" to see if the bootloader is the proper one for it to downgrade (4.6). if someone removes that part of the script then I think it would rewright the bootloader.

[lasuperyuka]

well after today i still having the no imei and no iccid in my iphone. Still said repair need message and when i restored to one firmware at the end said 1011 error. I verify my trace and i think thas is good after the reconstruction. The line conduce acording to the multimeter. Well if any can help us, many thanks!!!
I dont know if i buya new commboard this problem will be solved. Any one know it? i read that yes but i dont know whit security!
LaSuperYuka

[p01s0n]

guys read ALL this post

http://hackint0sh.org/forum/showthread.php?t=29995

[p01s0n]

no more 1011 error...

Baseband seems to be fully functional... now i try to unlock it with ziphone

[p01s0n]

Fully functional with 1.1.3 firmware...

Download unbrick112 from rapid$hare and follow the README !!!!


FINALLY !!!!!!!!!

[Gstar]

hi p01s0n,

how many attempts did you need to get the testpoint work?

i have also tried it with unbrick112 but stuck at "spamming AT...".

and how did you repair the trace? what tools did you use?

please reply...

gianni

[shiz1]

link for unbrick112?

[p01s0n]

hi p01s0n,

how many attempts did you need to get the testpoint work?
2 times

i have also tried it with unbrick112 but stuck at "spamming AT...".
I think this message is because you fail the testpoint ...retry... or maybe the trace is still broken ?

and how did you repair the trace? what tools did you use?

please reply...

gianni

a copper based paint... but i think my trace wasn't hardly broken...

The unbrick112 worked for me... and i was in the worst situation possible with no IMEI, no ICCID... nothing...every firmware (1.1.1/2/3) 1011 error, unable to downgrade to 1.0.2 and ziphone absolutely not working...
Now i have a fully functional phone with imei, iccid,wlan etc.etc.

So i think this is the way... retry the testpoint ;)

and good luck !

[ibroken]

posion, What did you do? the other thread said that (last entry) 1.1.4 didn't fix it.

[shiz1]

im also in the process of trying the Unbrick112 method.
Phone is 1.1.1OTB
No IMEI, ICCD, Baseband, Wifi present.
Needs Repair Screen
Error 1011 when restoring to ANY version fw (102,111,112,113)

Ive tried every conceivable other method possible and all failed to jailbreak/unlock/activate the phone. (ibrickr,apptap,winstaller,pacay,independence, ziphone (all versions))

Unbrick112 was the first to give some results!!!

@ 1.1.1 it jailbroke the phone but no VT terminal installs
@ 1.1.2 it jailbroke the phone AND vt term was present :eek: :D

Note: Not sure if the the version of VT term thats being loaded to the phone or the phone itself thats making vt term act screwy but, not only does the backspace button not work (as documented in the readme file), but once the text field within term fills up, the text continues on the following text field bellow, but with a huge space between the last character on the previous field and the one im about to type. It seems to be only a ...display issue thou as seemingly Commcenter unloads fine (i get one return after executing)

I got as far as unloading comm center last nite, but had to get to sleep, so i didnt have enough time to take apart the phone, and rewrite the BL....
Things ive tried:
IENEW returns an error
IUNEW -please connect tespoint
BBupdate -v returns an error.

QUestion about IENEW - that erases the BL, correct? Is erasing the BL absolutely necessary (given the error), or will rewriting the BL overwrite the existing (corrupt) BL regardless?

Ill try more later today, if this works successfully ill make sure to document the steps along the way.

[point_01]

where can i download Unbrick 112?

[p01s0n]

posion, What did you do? the other thread said that (last entry) 1.1.4 didn't fix it.

I didn't used the 1.1.4 firmware... EVERY firmware failed on my iphone with 1011 error...

You have to do another testpoint (if you have already done one...)...
I just downloaded ibrickr112 and followed step by step the README included in the package...

The file is here http://www.rapid$hare.com/files/93492163/unbrick112.zip.html

I don't know if this will work also for you but mine situation was one of the worst situation possible with nothing working (IMEI etc.etc.),week 50 (so undowngradable to 1.0.2),baseband broken (repair needed), no programs like iPhuc, Ziphone, iBrickr, Apptap usable...

[p01s0n]

im also in the process of trying the Unbrick112 method.
Phone is 1.1.1OTB
No IMEI, ICCD, Baseband, Wifi present.
Needs Repair Screen
Error 1011 when restoring to ANY version fw (102,111,112,113)

Ive tried every conceivable other method possible and all failed to jailbreak/unlock/activate the phone. (ibrickr,apptap,winstaller,pacay,independence, ziphone (all versions))

Unbrick112 was the first to give some results!!!

@ 1.1.1 it jailbroke the phone but no VT terminal installs
@ 1.1.2 it jailbroke the phone AND vt term was present :eek: :D

Note: Not sure if the the version of VT term thats being loaded to the phone or the phone itself thats making vt term act screwy but, not only does the backspace button not work (as documented in the readme file), but once the text field within term fills up, the text continues on the following text field bellow, but with a huge space between the last character on the previous field and the one im about to type. It seems to be only a ...display issue thou as seemingly Commcenter unloads fine (i get one return after executing)

I got as far as unloading comm center last nite, but had to get to sleep, so i didnt have enough time to take apart the phone, and rewrite the BL....
Things ive tried:
IENEW returns an error
IUNEW -please connect tespoint
BBupdate -v returns an error.

QUestion about IENEW - that erases the BL, correct? Is erasing the BL absolutely necessary (given the error), or will rewriting the BL overwrite the existing (corrupt) BL regardless?

Ill try more later today, if this works successfully ill make sure to document the steps along the way.

Same situation...
Ienew and bbudpate returned me an error...
I done the testpoint after lauching iunew...
After that i restored to 1.1.2 and it worked with no errors.

[Gstar]

hi guys,

what do u think about that?

hi all,

I think i have the same problem as yours which without bootloader. As i'm not familiar to unassembly my iphone and do the hardware A17 testpoints, is there any method to modify Sara's zibri.bat with below methods? I'm not sure its work or not but I would like to try.

Software downgrade bootloader
http://acujo.com/tutorials/how-to-do...software-only/

Rewrite a customize bootloader
http://iphonejtag.blogspot.com/2008/...s-to-come.html

I'm able to use Sara's unbrick112 but stop at "Spamming At, waiting for a response".

imucat (week 44, OTB1.1.1)
1) No wifi, unknown IMEI, unknown ICCID
2) Error 1011 no matter restore to any firmware in DFU or Recovery mode
3) Unable to jailbreak 1.0.2 after tried update firmare to 1.1.3, stop at "reboot in recovery mode"
4) Stuck at "Spamming AT, waiting for a response" by Ziphone


what is the gbootloader? can u write any BL you want?

gstar

[ibroken]

Awesome. can't wait to try it.

[italian]

just udate to 1.1.3 through itnues then it will fix the problem with unkown iemi and iccid and the unlock jailbreak and activate through the latest ziphone 2.4, it worked for me i had lost all hope on the ùnknown`i though it would be the end of my phone but now its a clean 1.1.3 phone

[aznbeayst]

how do i go about downgrading the BOOTLOADER (testpoint method) if according to geohot's insturctions I need to download bsd/vt100/bootloader downgrade to the phone... the problem is i have no communication with the phone... so whats the point of doing the testpoint method if i cant even run the software required on the phone?

[ibroken]

how do i go about downgrading the BOOTLOADER (testpoint method) if according to geohot's insturctions I need to download bsd/vt100/bootloader downgrade to the phone... the problem is i have no communication with the phone... so whats the point of doing the testpoint method if i cant even run the software required on the phone?

its mentioned on the previous page.

Well I tried it and everytime I try to test point it, it gets stuck at spamming AT. I know my trace is good, I looked at it under a microscope (cheap radioshack)

Anybody ahave the same issue and got it to work?

[aznbeayst]

its mentioned on the previous page.

Well I tried it and everytime I try to test point it, it gets stuck at spamming AT. I know my trace is good, I looked at it under a microscope (cheap radioshack)

Anybody ahave the same issue and got it to work?
stuck at your setep... stuck at spamming AT..... booo... looked under a jewelry loop and the trace seems connected still....

when you fget stuck at spamming AT, do you reboot the phone and try the process over again?

[ibroken]

stuck at your setep... stuck at spamming AT..... booo... looked under a jewelry loop and the trace seems connected still....

when you fget stuck at spamming AT, do you reboot the phone and try the process over again?

just press the home button and there will be a progress wheel taht last almost foreveer then the iphone will restart. Restart entire process.

[aznbeayst]

any luck getting it out of spamming at??

[ibroken]

any luck getting it out of spamming at??

Nope. I've tried like 15 times now. My trace might be broken somehow. Even though I looks under a microscope (cheap radio shack, so not saying much). I tried repairing it with a trace repair pen i got a radio shack. Its a glue like solution with silver flake in it (can see that its flake under the crappy microscope.

I did notice that when i restore to 1.1.2 It takes an extremely long time to finish (throw an error) for the firmware portion. Sometimes it won't through an error, it just stays at the restoring firmware screen forever, or until I unplug it. It doesn't do it to either 1.1.1 or 1.1.3. Strange.

[lasuperyuka]

Hi!
i trying again the hardware unlock.
Well to all people that can downgrad to 1.0.2 trate this:
downgrade to 1.0.2 using 7.6 itunes then unistall it and the quicktime and delete the library on itunes root. Then install 7.3 itunes and use ibrick to activate and then pacay. i have a 47 week.
Well, i still stock at spamming AT but sometime said attempting to read [1]...0 and stuck
well, is all for now
good luck and bye
lasuperyuka

[ikuwara]

Bro,

Reflash the Bootloader 3.9 again might help... Maybe your iphone get a not proper bootloader. Try to reflash again.

downgrade bootloader with software - click here (http://acujo.com/tutorials/how-to-downgrade-your-bootloader-with-software-only/)

ikuwara @ yahoo.com

[shiz1]

Everytime i downgrade to 1.0.2 and use ibrickr to jailbreak the phone, it goes into an endless boot loop. Pacay says its done, but its not jailbroken when it reboots. App tap installer freezes, Winstaller same thing....

Is there any other way to transfer the files to the phone?

[singularidad]

Bro,

Reflash the Bootloader 3.9 again might help... Maybe your iphone get a not proper bootloader. Try to reflash again.

downgrade bootloader with software - click here (http://acujo.com/tutorials/how-to-downgrade-your-bootloader-with-software-only/)

ikuwara @ yahoo.com

but... is it possible to reflash the bootloader 3.9 again if you already are on 3.9bl? I'm in the very same situation. I'm on 3.9 but i think it's corrupted... but I don't know if I can reflash it through software without totally bricking my iphone.

[ibroken]

After another failed attempt with pins. I got frustrated and decided to try the solder method. I scavenged some magnetic wire from a old PC fan that I had lying around.
I made sure that I soldered everything correctly by using my crappy microscope.pictured here
http://i4.photobucket.com/albums/y112/ak-z/Picture073.jpg


and soldered point here (taken with my other iphone and the microscope. view is inverted because of microscope.

http://i4.photobucket.com/albums/y112/ak-z/Picture.jpg

ran everthing to the T. (surprised that I didn't make any typos)

and still stuck at "spamming AT". so I am convinced that there is something else wrong with the commboard. perhaps its corrupted at a different point in the BL.. idk. I'm sure that many of you are experiencing a similar issue.

[brainscan]

hi,
i also tried to connect the testpoint but i am still stuck at "Spamming AT". I am quite sure that i was able to connect the test point. Is there a possibility that something else on the commboard is broken? not the bootloader? I think I never touched the bootloader. Can I check whether my secpack or bb or something else is broken?

unbrick112 helped me alot! This is how I got so far!

[jameszjca]

hi,
i also tried to connect the testpoint but i am still stuck at "Spamming AT". I am quite sure that i was able to connect the test point. Is there a possibility that something else on the commboard is broken? not the bootloader? I think I never touched the bootloader. Can I check whether my secpack or bb or something else is broken?

unbrick112 helped me alot! This is how I got so far!

"Spamming AT" means the testpoint is not CONNECTING when iunew starts to run. For example, if you "sleep 45; iunew", you must connect and hold testpoint from 40 to 50 second after you enter the command. Because at the time of 45 seconds, the iunew starts to run. At that moment testpoint must be connected.

[mwkoblenz]

Is there a script which automatically uploads all necessary files to reflash the bootloader and gives 1 minute to connect A17 testpoints?
I got stuck on the "Spamming AT, waiting for a response" screen when I use zIphone!
Ive got the baseband from 1.1.4 firmware on it. I cant activate the 1.0.2 firmware. NO WIFI
What can I do?

[Gstar]

yepp use 112unbrick.

all needed files being uploaded. jailbreak and activation too.
but only works on FW 1.1.2. so you have to downgrade.
you must write the commands manually and then you must do the testpoint.


another question:
can anybody tell me how to check the 1.8V power source with a circuit analyzer?

EDIT:
There is no 1.8V! There is 0.0V. whats wrong with the capacitor???

[brainscan]

hi,
how did you measure the voltage? where did you connect the voltage meter?

capacitor against sheelding?

I want to check myself, because still stuck at spamming AT

[Gstar]

hi,
how did you measure the voltage? where did you connect the voltage meter?

capacitor against sheelding?

I want to check myself, because still stuck at spamming AT

i used a voltage meter. i have connected the test tips of the voltage meter with one side of the capacitor and the negative pole of the battery. some other capacitors have power but this one has 0,0V. any clue?

gstar

[articsun]

Did you try this method ?
http://www.hackint0sh.org/forum/showthread.php?t=33566

[ikuwara]

I think iphone dev team gonna fix this problem soon...


Most of us got error message like this
AppleMRVL868z: Invalid calibration data in device tree


I read something. It is related to device tree..
"After booting up, we patch out signature check from AppleImage2NorAccess extention and proceed with flashing our custom firmware files (iBoot, LLB, DeviceTree, and pictures)"

iBoot is the last and most complicated bootloader on the devices, and is what actually loads up the kernel with device tree.

From : http://iphone-dev.org/s5l8900 : pwnage