View Full Version : [1.0.2 (1.1.2 OTB) ][IMEI & ICCID: Unknown] HELP PLEASE!
lasuperyuka
02-07-2008, 11:41 PM
This is my case:
I have a 1.1.2 oob. I haved a 1.1.2 firmware jailbreaked. I try the hardware unlock but i make some mistakes:
first: i open my iphone but dont downgrade to 1.1.1
two: i remove the conector of the back case
last: i turn off my iphone
then i have a mesage: need repair (no IMEI no ICCID)
well i readed all in this forum. ALL.
I did it all.
bbupdater, iunew, ienew, all. Incluse i upgrade to 1.1.3 via itunes.
i still have my iphone briked: Repair Needed: Iphone cannot make or recive calls. IMEI: Unknown
ICCID: Unknown
SOMEBODY CAN HELP ME PLEASE?
thank a lot for the posible information that all of you can give for this!
LaSuperYuka
p.d. Sorry by my enghish
petemag
02-08-2008, 08:28 PM
Hi lasuperyuka
we are a few guys in the same boat as you.
If you can't restore to 1.0.2, 1.1.1, 1.1.2 or 1.1.3 without any error in iTunes
AND if you can't restore to 1.0.2, 1.1.1, 1.1.2 or 1.1.3 with error 1015 in iTunes you have a bricked phone and there is nothing you can do about it at this time - almost! Some users have been able to unbricked their phones by restoring multiple times from one firmware to the other and in the end either receive error 1015 - or - gotten their iphones downgraded to 1.0.2 after multiple restores. So the key is to get your phone to 1.0.2 - if you can't, you have a bricked iPhone - for now.
cap33me
02-09-2008, 12:13 AM
It sh ould be said im in the same boat sorta, after doing a restore to 1.02 after a failed 4.6 bl software unlcok attempt. Now in 1.0.2 unknown both / itunes failes on all fw's .... additionaly i cannot make or recieve calls it says because it needs to be repaird.
CKone
02-09-2008, 02:06 AM
i have exactly the same problem!!
someone tried the bricktool?
petemag
02-09-2008, 01:21 PM
You need to copy a file to the iphone in order to use the brick tool - which you can't right now..
Gstar
02-09-2008, 08:36 PM
what can you with bricktool?
iam on 1.0.2 w/o imei etc, erased baseband and still BL 4.6 i think...
thx 4 help
TriBalla
02-09-2008, 09:22 PM
If there is anyone out there who can help me with the no imei, iccid.. plz conntact me on pm
alino74
02-10-2008, 02:04 AM
This is my case:
I have a 1.1.2 oob. I haved a 1.1.2 firmware jailbreaked. I try the hardware unlock but i make some mistakes:
first: i open my iphone but dont downgrade to 1.1.1
two: i remove the conector of the back case
last: i turn off my iphone
then i have a mesage: need repair (no IMEI no ICCID)
well i readed all in this forum. ALL.
I did it all.
bbupdater, iunew, ienew, all. Incluse i upgrade to 1.1.3 via itunes.
i still have my iphone briked: Repair Needed: Iphone cannot make or recive calls. IMEI: Unknown
ICCID: Unknown
SOMEBODY CAN HELP ME PLEASE?
thank a lot for the posible information that all of you can give for this!
LaSuperYuka
p.d. Sorry by my enghish
Hi..
I am in the same situation, i did everything you did, whit same result.. i phone bricked.. :mad: :mad:
i read all, i tried all, but nothing..
i think we have to buy another one..:( :(
lasuperyuka, Where are you from ?
PLEASE HELP US !!!!!!
alino74
02-10-2008, 02:14 AM
For all guys like me..
I tried everything, no solution worked for me.
Today i tried my test point whit my tester, and i discover that you have to push
pretty much, if not you haven't the connection. May be some of you like me didn't push enough on test poit and brock the baseband.
I don't know if im right, but is an hope like everytingh i read..
cross our finger guys..
pspklant
02-10-2008, 10:43 AM
Guys!! The solution is FW 1.0.2.! Ok?
If you are in FW 1.0.2. you are saved ;). I have done it with iBrickr.
You have to try it, not one time, not two times, but XXXXX times!!
Greetz, en good luck!
ibroken
02-10-2008, 06:44 PM
I have the same problem.
Except. mine is a is a OTB 1.1.2 and am unable to downgrade to 1.0.2.
Is there a way to downgrade to 1.0.2 or another solution?
CKone
02-10-2008, 07:05 PM
i am on 1.02 jailbraked now...
but how to get the baseband back working??
i have bsd subsys and terminal running too...
...tried restore 1000times to 1.1.1,1.1.2,1.1.3....no chance
lasuperyuka
02-11-2008, 07:30 PM
Hello people!
I'm now in the same problem described before. I consult with a iphone tecnique becose i think that if i change the commboard maybe the phone back again. I'm in Venezuela, and the change is too expensive here. I check the trace of the hardware with a magnifyer glass and i saw a golden line there. Maybe the trace is cut, may be not. I lose my wifi before did the test point. I think is normal that becose only in 1.0.2 not lose it acording that i readed.
Well i don give up. I work until i recober my iphone. And all progress i will reported here to all of you.
And i restore to 1.0.2 with itunes 7.6 but is necesary that then you uninstall it and install 7.3 to unlock the 1.0.2 fw (ibrick or apptapinstaller, i did it with ibrick). And don't forget erase the library file (or move it) to open the 7.3 itunes.
Well, dont give up!
LaSuperYuka
lasuperyuka
02-13-2008, 02:03 AM
Well after did it all to restore my bricked iphone i cant did it for now.
I try now to test my commboard and the A17 trace. I think that it is broken. I really dont know that but i have very hope. I readed some thread and restoring the trace then the phone is back.
Some one know the exctly method for this?
I saw my A17 trace and i saw a golden line but how i can know if it is broken?
All in my iphone indicate me that it is broken, but i really want to know if have some aditional fact that prove to me that the line is broke.
Somebody know?
Thanks a lot
LaSuperYuka
Gstar
02-14-2008, 08:58 PM
hello,
i think i broke my trace more than one time :D
now i have ordered a special conductive silver lacquer for trace repairing.
hope it will work.
and then 1.1.3 and ziphone with BL downgrade by soft for real 4.03.13_G unlock and google locate me. NO MORE HW UNLOCKS !
gstar
http://img179.imageshack.us/img179/7905/vlcsnap39485oq5.png (broken trace)
lasuperyuka
02-15-2008, 02:37 AM
wow! nice photo. And yes, i can see the broken trace. I try with a camara now to see my phone.
By the way, what's the name of the conductive pencil? o the link where you buyed it?
Good luck and report your progress!!!
LaSuperYuka
Gstar
02-15-2008, 11:48 AM
hello,
here is the link ebay (http://cgi.ebay.de/LEITSILBER-Silberleitlack-zB-f-Heckscheibenheizung_W0QQitemZ290206458622QQihZ019Q QcategoryZ85491QQssPageNameZWDVWQQrdZ1QQcmdZViewIt em). its in german.
the seller ships worldwide...
regards
gstar
petemag
02-16-2008, 12:55 AM
Have you tried using iJailbreak? ijailbreak.com
lasuperyuka
02-16-2008, 01:27 AM
well i dont use it ijailbreak but i try later.
Today i talk with a cell phone tecnique and he told me that tomorrow he will be able to rebuild my broken line. Well i am very hopeply and tomorrow i give to all my results.
Thank a lot to all of you!
LaSuperYuka
ibroken
02-16-2008, 02:53 AM
hello,
here is the link ebay (http://cgi.ebay.de/LEITSILBER-Silberleitlack-zB-f-Heckscheibenheizung_W0QQitemZ290206458622QQihZ019Q QcategoryZ85491QQssPageNameZWDVWQQrdZ1QQcmdZViewIt em). its in german.
the seller ships worldwide...
regards
gstar
So did fixing the trace fix it for you?
Gstar
02-16-2008, 03:30 AM
So did fixing the trace fix it for you?
hi,
i don't have the silver yet. hope i gonna get it tomorrow or on monday.
but i write a little step by step tuto with some photos how i gonna fix the trace.
hope it works :rolleyes:
gstar
lasuperyuka
02-16-2008, 08:45 PM
Well, today i give my commboar to a tecnique and he restore the trace. Im now installing 1.1.3 but error 1011 still ocurs. Well if i dont have progress i buy a new commboar if are in stock in ifixit. Well, after all, i did everithing.
Good luck to all of you!
LaSuperYuka
ipodee
02-17-2008, 07:07 AM
Hi, I followed the instructions on http://iphone.unlock.no/#Bypass-Activation-and-Jailbreak to jailbreak my 1.1.1 iphone upgraded from 1.0.2.
At the last step, it's supposed to return me to activation screen and restart after i clicked on the jailbreak link.... The phone just kept loading without restarting...
I'm stuck! Please help
ibroken
02-17-2008, 09:27 PM
Hi, I followed the instructions on http://iphone.unlock.no/#Bypass-Activation-and-Jailbreak to jailbreak my 1.1.1 iphone upgraded from 1.0.2.
At the last step, it's supposed to return me to activation screen and restart after i clicked on the jailbreak link.... The phone just kept loading without restarting...
I'm stuck! Please help
What OTB phone is yours. you just might have to set the phone into DFU mode and restore it.
sunilvirus
02-18-2008, 03:26 PM
For the people who want to downgrade to 1.0.2, see if this helps
http://gadgetsandyou.blogspot.com/2008/02/112-ootb-hardware-unlocking-downgrading.html
lasuperyuka
02-21-2008, 12:23 AM
well after today i still having the no imei and no iccid in my iphone. Still said repair need message and when i restored to one firmware at the end said 1011 error. I verify my trace and i think thas is good after the reconstruction. The line conduce acording to the multimeter. Well if any can help us, many thanks!!!
I dont know if i buya new commboard this problem will be solved. Any one know it? i read that yes but i dont know whit security!
LaSuperYuka
Gstar
02-21-2008, 05:17 PM
hi superyuka,
same here. trace repearing does not show any effect. i get the same error 1011 :mad:
gstar
shiz1
02-25-2008, 06:47 AM
you guys should check out this thread and check the posts by macchap
However unfortunately she's very brief with the breakdown of the steps she took...
p01s0n
02-25-2008, 09:27 PM
guys read ALL this post
http://hackint0sh.org/forum/showthread.php?t=29995
lasuperyuka
02-29-2008, 03:04 AM
Hi!
i trying again the hardware unlock.
Well to all people that can downgrad to 1.0.2 trate this:
downgrade to 1.0.2 using 7.6 itunes then unistall it and the quicktime and delete the library on itunes root. Then install 7.3 itunes and use ibrick to activate and then pacay. i have a 47 week.
Well, i still stock at attemting AT but sometime said attempting to read [1]...0 and stuck
well, is all for now
good luck and bye
lasuperyuka
ikuwara
02-29-2008, 04:53 AM
Bro,
Reflash the Bootloader 3.9 again might help... Maybe your iphone get a not proper bootloader. Try to reflash again.
downgrade bootloader with software - click here (http://acujo.com/tutorials/how-to-downgrade-your-bootloader-with-software-only/)
lasuperyuka
03-01-2008, 02:21 AM
i use gbootloader wit 3.9 bootloader. The process stuck at spamming AT.
I try to probe wit 4.6 bootloader but i dont have the file.nor for this and really i dont know if work to upgrade the bootloader. I think something is wrong with the commboard. i thing that i buy one new of ifixt. By the way i buy a new 16Gb. The next week arribe to me.
But i want to repair my bricked iphone becose is personal fact that i proposed to me now lol
LaSuperYuka
vBulletin® v3.7.3, Copyright ©2000-2008, Jelsoft Enterprises Ltd.