Infinity USB Unlimited and Woron Scan

[iMags]

Hey.
I got my Infinity USB Unlimited today, I installed the driver, installled Woron Scan.
Then I inserted my carrier SIM card in to the Infinity USB Unlimited, started Woron Scan, clicked on Tasks and IMSI select.

All I got was
Communication problem... closing COM port...
Phoenix device selected COM port is not available...
Communication problem... closing COM port...
Can't select 3F00 file

Any ideas?

[iMags]

I get the same result even if the Infinity USB UNLIMITED is connected or not.... :confused:

[sp00k]

Hi!

Make sure that the Infinity is in the COM-Port mode. So start the Infinity Software and enable the COM-Port (I think it is called something like VCP mode). In Woron-scan also select the Phoenix-Mode and adjust the Baud-Rate.

[deadzone]

If you get communication error it means you dont have the latest version of USB Unlimited. Get the new onw and set it to VPC mode

[iMags]

Where in Woronscan do I adjust the Baud-Rate?
I believe its in COM-Port mode now, but same result...

(when you say Phoenix-Mode, you mean I have to select Phoenix Card in Card Reader in Woronscan, or what?)

[sp00k]

No, the "Phoenix-mode" is activated in the Infinity USB Unlimited Software (the Software installed with the driver).

Look here:
http://www.infinityusb.com/default.asp?show=supportdetail&ProductID=11&SupportID=18

Enabling and setting up the VCP mode
In the "Tools" menu of the Infinity USB Unlimited, choose "Virtual COM port (VCP) mode", and the following setup-window will appear:

Then in Woron scan under "card reader" select the chosen COM PORT and the speed.

[Oleg Richards]

Guys! I've had such problem. Solution is just to use SimClone 2.0 software, not WoronScan.. There are some SIM cards, which Woron can't read.

Good Luck

[iMags]

Still getting same result..
I cant find the simclone software.. link?

EDIT:
This is my settings in the Infinity USB Unlimited software:
http://img407.imageshack.us/img407/4638/bilde97nm8.png

This is my settings in Woronscan:
http://img410.imageshack.us/img410/420/bilde98gw3.png
http://img410.imageshack.us/img410/9126/bilde99cn6.png

[wombat]

i know it sounds stupid, but try changing woronscan only to the 16000 bit/sec setting and let me know how that goes.

[iMags]

huh... i tried 16000 bit/sec
now I got all this:
Communication problem... closing COM port...
The real speed is 16457..
There is a card in Phoenix device:
ATR:
9B 5F 55 C0 9F E7 C0 91 E0 B3 FE 01 1B 23 62 03
D4 C3 0F
Communication problem... closing COM port...
Can't select 3F00 file

What is ATR?

[iMags]

OK.
I got IMSI and ICCID, but when I tried to search for Ki I got this

The real speed is 9600..
There is a card in Phoenix device:
ATR:
3B 9F 95 80 1F C7 80 31 E0 73 FE 21 1B 63 E2 03
94 83 0F 90 00 BE
PIN1 is enabled
PIN1 remaining 3 attemps
PUK1 remaining 10 attemps
Successful PIN1 verification
20:50:58
Starting 2R attack on 0 pair....
The GSM algorithm is not comp128-1 ...Scanning stoped...
20:50:59

What now?

[cashgrow]

this means that your simcard is not v1

[iMags]

oh crap...

[cashgrow]

yeah i know, got the same here.. the hunt for sim v1 cards in Norway is on!

[iMags]

Yeah...
*Jeg skal til Elkjøp på mandag og høre om de kan skaffe meg et V1 SIM kort.. Jeg spurte NetCom og de sendte meg bare videre til Elkjøp nemlig... Hvis ikke Elkjøp kan skaffe meg det kan jeg høre med kompisen til en jeg kjenner som jobber i Telekiosken.*
(sorry for norwegian)