[1.0.2 (1.1.2 OTB)][Problem downgrading bootloader]

[unknownuser]

my iPhone...

Week - 47
1.1.2 O.O.B from USA Apple store

updated to 1.1.3 then downgraded the firmware to 1.0.2 - the modem firmware is still 04.03.13_G

Took phone apart and have turned A17 testpoint on.

My Problem = cant downgrade bootloader to 3.9


# launchctl unload /System/Library/LaunchDaemons/com.apple.CommCenter.plist
# ienew
Resetting the Baseband...Done
Opened: /dev/tty.baseband
iEraser for 112OTB: tool by geohot
Waiting for data...
Got Header: 77 0b cc
02 00 85 00 02 00 FF FF 85 02 03 00
SECPACK
02 00 04 02 06 00 01 00 00 00 00 00 0B 02 03 00
Erase
02 00 05 08 02 00 00 00 07 08 03 00
02 00 06 08 06 00 01 00 00 00 A0 00 AD 08 03 00
Hopefully the main flash was erased, wait for the next step...
#

(I connect the 2 Points)

# iunew
Resetting the Baseband...Done
Opened: /dev/tty.debug
iUnlocker: tool by geohot
Modified to erase
Spamming AT, waiting for a response
Attempting to read[1]...c0
Connected established to bootrom
File size: 1688
Checksum: 0xBF
Attempting to read[1]...c1
Did you erase the flash first?
#

every time it tells me "Did you erase the flash first?"
one time it told me "Please connect the testpoint"

Anyone else get this?

[unknownuser]

can someone help me before my brother finds out what i did to his phone? :(

[wildbomb]

It only works if you have the 1.1.2 baseband. But you updated to the 1.1.3 baseband, so you have to wait for 1.1.4 to be able to do it.

[moho]

you upgraded to 1.1.3.
your toast until a new FW with a new BL is released.

[unknownuser]

so, once the 1.1.4 firmware is released. i extract the secpack file from it, and can perform this procedure without any problems?

[thePablo]

my phone was 112 dowgraded to 111 then i ran ienew. output was as it should be then ran iunew and it gave me the 'Did you erase the flash first? can anybody help. Dont know what to do next. Do i erase and try again?

[boliva]

Hi,

I've managed to successfully unlock an 1.1.2 OTB iPhone (not the one i recently bricked), almost. After connecting the testpoint and running 'iunew' successfully I have been unable to write any firmware version successfully so again I have a 'repair needed' phone. However I was now able to downgrade to 1.0.2, manually jailbreak and activate it and have copied all the tools needed to repeat the operation.

This time 'ienew' fails with 'Can't write', and 'iunew' sometimes stays at 'Spamming AT, waiting for response' and sometimes it spits 'Did you erase the flash first?'.

Whenever I try to run bbupdater (be it with -v or specifying a .fls and .eep file with -f and -e) it says 'Error: Failed to initialize comm layer: (is it open by another app?)'.

Just to note: I have indeed stopped the CommCenter, and all the related files needed to do the unlock have the correct permissions on them.

Regards and thanks for your time.