View Full Version : Unlocked 1.1.1 with AnySIM 1.2u - no service
plonker
11-20-2007, 04:36 AM
I have a 1.1.1 Activated and "Unlocked" iPhone. I used AnySIM1.2u in 1.1.1. It reported it was successful. Reads the SIM but no service.
I started with OTB 1.1.1
Down to 1.0.2
up to 1.1.1 - Failed
Restore to 1.1.2
Down to 1.1.1
Ran AnySiM 1.1 -Fail
Ran AnySIM 1.2u
Success
No Service
bbupdater returns:
04.02.13_G
eep_version:208
eep_revision: 1
bootloader: 3.9_m3s2
1.What is wrong? (really want to know this)
2.What should I do? (thinking about doing this http://www.winandmac.com/mobile/iphone/unlock-iphone-112-via-downgrade/) (http://www.winandmac.com/mobile/iphone/unlock-iphone-112-via-downgrade/)
I thank you for your time.
Digga
11-20-2007, 04:40 AM
I had same issue and at some point (during the revirginize and then consequent upgrades through 1.1.1 -> 1.1.2 I had my AT&T original SIM in the phone.
I got the "No Service" message with the AT&T SIM but then at last moment switched out to local provider's and it now works. I don't know for sure, but think that having the AT&T one in there during firmware restores/upgrades makes a difference.
Have your SIM in at the point you run anySIM 1.2.1u.
Cheers, -= Digga =-
plonker
11-20-2007, 04:42 AM
Thanks Digga,
I had my non att SIM in there at the time of unlock
I also noticed someone ha posted a similar post....sorry for double post but I would still like to know what exactly is wrong, i can provide more details if needed
simonxda
11-20-2007, 05:01 AM
I did it without going to 1.0.2. From 1.1.1, Restore to 1.1.2, downgrade to 1.1.1 and install BSD, OKtoPrep and run Anysim 1.2u. Then you update to 1.1.2, jailbreak and all done.. :)
plonker
11-20-2007, 05:08 AM
Is there a link to this procedure i can follow?
Thanks
simonxda
11-20-2007, 05:17 AM
Is there a link to this procedure i can follow?
Thanks
I'm using this link and I think its the same as what everyone has been following.
The write up are not clear and many misleading of OTB1.1.2 user to try unlock anysim which can't be done right now. But it sure to work on OTB1.1.1 and below. :)
http://hackint0sh.org/forum/showthread.php?t=15567
plonker
11-20-2007, 05:20 AM
Sorry simonxda,
Should I start at a specific step? Just a little paranoid. Thanks for your help and patience.
simonxda
11-20-2007, 05:51 AM
Here..
1. OTB1.1.1 without doing anything, restore to 1.1.2.
2. Restore back to 1.1.1, got error 1015 and it stay in DFU mode forever.
3. Start iphuc and run the following and your iphone will start. In each time your iphone reboot it will still be in DFU mode and you have to run the following command to start until your are in 1.1.2.
cmd setenv auto-boot true
cmd saveenv
cmd fsboot
4. Unlock using the easy way which most people use to jailbreak and unlock.
http://hackint0sh.org/forum/showthread.php?t=13034
5. Install BSD, OKtoPrep, Anysim 1.2u and run anysim. At this point you won't be having any sevice yet untill you update to 1.1.2 and jailbreak.
6. Use update and Not restore to 1.1.2.
7. Jailbreak using 1.1.2-jailbreak-UPDATED.zip which need java.
http://hacklabs.googlecode.com/files/1.1.2-jailbreak-UPDATED.zip
8. Search this forum for a correct AppSupport for 1.1.2 or the following.
http://hackint0sh.org/forum/showthread.php?t=7736&page=41
SimplePanda
11-20-2007, 09:45 AM
I have a 1.1.1 Activated and "Unlocked" iPhone. I used AnySIM1.2u in 1.1.1. It reported it was successful. Reads the SIM but no service.
I started with OTB 1.1.1
Down to 1.0.2
up to 1.1.1 - Failed
Restore to 1.1.2
Down to 1.1.1
Ran AnySiM 1.1 -Fail
Ran AnySIM 1.2u
Success
No Service
bbupdater returns:
04.02.13_G
eep_version:208
eep_revision: 1
bootloader: 3.9_m3s2
1.What is wrong? (really want to know this)
2.What should I do? (thinking about doing this http://www.winandmac.com/mobile/iphone/unlock-iphone-112-via-downgrade/) (http://www.winandmac.com/mobile/iphone/unlock-iphone-112-via-downgrade/)
I thank you for your time.
If that is -exactly- what you did, you're actually unlocked.
The problem is that when you restored to 1.1.2 to updated the baseband to 1.1.2 (4.02.13). 1.1.1 firmware doesn't work with the 4.02.13 baseband.
Here's how to fix:
- Go to jailbreakme.com - jailbreak/activate your iPhone.
- Use the resulting "Installer" to install OktoPrep (Tweaks)
- UPDATE (not restore) to 1.1.2
- Run the latest jailbreak-1.1.2 jar file with you iPhone plugged into to activate/jailbreak
At that point, you should have a jailbroken, activated, unlocked 1.1.2 phone.
patvg
11-20-2007, 09:48 AM
I have a 1.1.1 Activated and "Unlocked" iPhone. I used AnySIM1.2u in 1.1.1. It reported it was successful. Reads the SIM but no service.
I started with OTB 1.1.1
Down to 1.0.2
up to 1.1.1 - Failed
Restore to 1.1.2
Down to 1.1.1
Ran AnySiM 1.1 -Fail
Ran AnySIM 1.2u
Success
No Service
bbupdater returns:
04.02.13_G
eep_version:208
eep_revision: 1
bootloader: 3.9_m3s2
1.What is wrong? (really want to know this)
2.What should I do? (thinking about doing this http://www.winandmac.com/mobile/iphone/unlock-iphone-112-via-downgrade/) (http://www.winandmac.com/mobile/iphone/unlock-iphone-112-via-downgrade/)
I thank you for your time.
if you did upgrade to 1.1.2 already (not important if you were on 1.02 or 1.1.1), this means your baseband is on 04.02.13_G (the 1.1.2) which was/is fine
if then you ran anySIM 1.2.1(u) : that's OK, your baseband is unlocked ! It is normal you have no signal under 1.1.1 with an unlocked 04.02.13_G baseband
now run Oktoprep under 1.1.1
upgrade in iTunes to 1.1.2
jailbreak/activate using the 1.1.2 jailbreak/activate tool
in Tweaks 1.1.2 : run iWorld
you're all done !
plonker
11-20-2007, 11:13 PM
Awesome, Thanks, i will let you know how it goes!
Plonks
jt0518
11-20-2007, 11:37 PM
Hi everyone..Im having trouble..I downgraded to 1.0.2 jailbreaked installed any sim 1.2u..Unlock successfull..then restored to 1.1.1 ran the jailbreakme.com..afterwards ok to prep for 1.1.2..updated..jailbroke again..and when i insert my t mobile sim there is a message saying different sim please conect to itunes..Any ideas what went wrong?? by the way i used my att sim throughout the process
plonker
11-21-2007, 08:03 PM
This worked great! Thanks!!!!!!!!!
SimplePanda
11-21-2007, 08:16 PM
This worked great! Thanks!!!!!!!!!
I take it the OktoPrep/Update to 1.1.2 fixed your problem?
porcaccio
11-23-2007, 07:48 AM
Hi everyone..Im having trouble..I downgraded to 1.0.2 jailbreaked installed any sim 1.2u..Unlock successfull..then restored to 1.1.1 ran the jailbreakme.com..afterwards ok to prep for 1.1.2..updated..jailbroke again..and when i insert my t mobile sim there is a message saying different sim please conect to itunes..Any ideas what went wrong?? by the way i used my att sim throughout the process
bumping trying to get an answer to this. tried this same method with the foreign sim (SIM LOCKED) in the whole time, everything seemed to have gone fine, but iphone now claims INCORRECT SIM. Any ideas?
eddy123
11-23-2007, 08:06 AM
anySIM 1.2.1u will not work properly under iPhone 1.1.1.
Note after step 8 of the following guide, you will not see the iPhone pick any signal:
http://www.winandmac.com/mobile/iphone/macfirst-ultimate-guide-unlock-iphone-112/
vBulletin® v3.7.3, Copyright ©2000-2009, Jelsoft Enterprises Ltd.